Publications | Site Map     Research Surgery Critical Care Hemodialysis Radiology OEM About Contact FAQ's             HVT100 Endovascular Flowmeter & ReoCathTM Flow Catheters       HVT100 The Flowmeter provides objective, quantitative and convenient flow measurements that help you restore functionality to the access and confirm the success of the angioplasty. The easy-to-read front panel LED displays blood flow in ml/min. The Start button guides you through the procedure.   ReoCathTM Flow Catheter Transonic’s patented single-use catheter uses thermal dillution technology to measure access flow. The catheter is inserted through an introducer and a 10 cc injection of saline produces a direct reading of access flow. Instructions for ReoCathTM Use> New Patented Technology System Components The system consists of the HVT100 Endovascular Flowmeter, ReoCath extension cable, and the ReoCath Flow Catheter. HVT100 Specifications Single channel flowmeter Weight: 4.5 Kg (10lbs) Size: 27.8 cm wide x 9.12 cm, high x 35.4 cm deep (11” wide x 4” high x 14” deep) Blood flow display 6 character LED ReoCath extension cable connector 4-pin circular locking connector ReoCathTM Extension Cable 2 m length ReoCathTM Antegrade Flow Catheter Designed to measure access flow Sterile catheters are designed for human use 6 French (F) size 35 cm length Designed to be used with a 6 French (F) or larger introducer Principle of Operation Patent # 6,623,436 & 6,746,408   To Order: Contact Transonic Tel: +1 607-257-5300 Fax: +1 607-257-7256 support@transonic.com Primary International Representative: Matt Woolson     Print Page            Surgery | Critical Care | Research | Hemodialysis | OEM | Publications | Customer Service      ©2007 Transonic Systems Inc.  All rights Reserved. Privacy Statement